This post is an ultimate guideline for Chainmesh Fencing. Here, you will get to know about Chainmesh Fencing Installation, Manual & its cost per meter.
Are you willing to secure your property within a light budget but don’t know its procedure? If yes, then congratulations, you have already found the page. Chainmesh fencing may be the solution that you are looking for.
We understand the stress you face because of the low security of your property. High-security systems demand a lot of expenditure, but no more. You can have a chainmesh fencing installation without excess money expense. To learn how chainmesh fencing works, keep reading!
What Is Chainmesh Fencing?
Chainmesh or chain link fence is a woven type of fence generally made of LLDPE coated or galvanized steel wire. The vertically running wires are bent into a zig-zag pattern. Each “zig” of the wire attaches with one side of the wire, while the hooking makes the “zag” of wire on the other side. This forms the diamond pattern of the fence we usually see.
Chainmesh Fencing Installation Manual
The installation of chainmesh fencing involves setting posts of timber, steel tubing, or concrete in the ground and attaching the fence to them. The corner or gate posts, known as “terminal posts,” must be set in concrete footing or otherwise anchored to prevent bending under the tension of a stretched fence.
The posts set between the terminals are called “line posts,” which develop at intervals with a limit of 10 feet. The fence is then tied to the line posts with aluminum wire. The fence is attached at one end, stretched, and then it is connected to the other end, easily removing the excess by “unscrewing” the wire.
To reduce the in and out movement at the bottom of the chain-link mesh between posts, the installer stretches a bottom tension wire referred to as “coil wire.” After stretching, the bottom wire should be secured with the line posts and the chain-link mesh; hog ringed to the tension wire 2’ on center.
Chainmesh Fencing Cost
The cost of fencing depends on the material and service you are choosing. You can have a fence alone or a service to install it for you. Metal or chain fencing can cost you $70 – $120 per 15 meters. These prices don’t include the labor cost of the fence installing service as it totally depends on the contractor. So, you should find the best cost-effective service for chainmesh fencing Perth.
Does Chain Link Fence Need Tension Wire?
Yes, tension wire is an essential part of chain link fencing. It tends to secure the top and bottom of your chain link fence and ensures that your chain links remain tight to the posts and rails. Tension wire is primarily manufactured from spring steel.
This means that the tension wire can handle a considerable amount of resistance towards stretching or bending. The fundamental reason to secure the bottom of your chain link fence with a tension wire is to prevent anything from pushing under the fence.
Generally, this is to keep an animal in sports field applications, protecting property, or any other purposes. In high-security applications, it is used to prevent people from entering certain areas.
Should Chain Link Fence Touch The Ground?
Usually, it is not recommended for a chain-link fence to touch the ground. However, the exception depends upon the purpose of the fence. By the ground contact of the chain mesh fence, the bottom of the fence becomes more vulnerable to corrosion. It can further create a problem for yard maintenance. For instance, a ground touching fence can prevent rabbits or other small animals from entering your garden.
The pet owners also benefit from installing the fence above the ground as having it touching the ground can stop small breed dogs and other pets from digging underneath. Simply think of the purpose you’re installing a fence for. If a ground-touching fence seems to work better for your goal, then you know the answer.
How Do You Secure A Chain Link Fence At The Bottom?
There are three options to secure a chain-link fence at the bottom. The first option is to install a tension wire at the bottom of the fence line. This wire helps to prevent the bottom from pulling up and runs between the terminal post, line posts, and the chain-link fence. The bottom tension wire is generally stretched after the fence project is framed.
The second option is to install stakes shaped like horseshoe drive-ins to catch the bottom tension wire. One or two stakes per space between the posts should succeed. The third option is to install a bottom rail. Choose a diameter to match your top rail, and the bottom will go well along. Additionally, the bottom rail attaches to the line posts with chain-link line rail clamps.
Do I Need To Use Concrete For Fence Post?
Yes, concrete is the most secure choice for setting fence posts. It will work even better if you have sandy soil. Other materials might be okay with dense, clay-heavy soil, but in loose soil, concrete is the only thing that will actually keep your fence post stuck in the place. Using premixed concrete instead of dry concrete will ensure ultimate security.
How Many Bags Of Concrete Do I Need ForA Chain Link Fence Post?
In general, you will need 37 concrete bags of 60 pounds or 28 packs of 80 pounds for the chain link fence installation. A 40-pound bag of concrete creates 0.3 cubic feet, while a 60-pound bag mix 0.45 cubic feet. Similarly, an 80-pound bag is used to produce 0.6 cubic feet. So, just go for the amount according to your requirement.
How Many Bags Of Concrete Do I Need For A 4×4 Fence Post?
Six feet high fence post 4×4 needs a hole of 12-meter diameter by about 2 to 3-meter depth. So, that would take four bags of 50LB of fast-setting concrete makes per 4×4 fence post.
Having a chain link fence will be the best step for your security without being heavy on your pocket. Installation of a chain-link fence involves a lot of technical and practical measurements. So, it’s better to leave the procedure to the professionals instead of trying DIYs. If you have any queries, please feel free to contact us.
You also may like:
Rayhan Sarwar is A Student of Glass and Ceramic Engineering, a Science blogger, SEO, and SMM professional. He is one of the editors Of the Revolution Report. He likes to research health, wellness equipment. He is the webmaster of the science blog The Behind Science.